Dualcomm 1to3 network regeneration tap Capture 1 link with 3 ports

This page keeps all original information and links. Japanese page

＋ Product list → CommView → TamoGraph → Wi-Spy → Chanalyzer → WLAN Pi → MetageekApp → ProfiShark → IOTA → tap products → Dualcomm → penetration training equipment → password recovery → Side channel fault injection → Wireshark
＋ Dualcomm products → Aggregation type tap → Active type 10G compatible SFP/SFP+ tap
→ Zero delay tap for industrial LAN → 1to3 Regeneration TAP → Optical fiber compatible full duplex tap
→ Raspberry Pi Network Appliance ETAP-PI


Dualcomm network tap products → DualcommInc.公式サイト

→ Aggregation type tap → Zero delay tap for industrial LAN
→ 1to3 Regeneration TAP → Optical fiber compatible full duplex tap

For those who want to capture one link (inline connection) with three interfaces
1to3 network regeneration tap is available
For those who want to capture with multiple ports using IDS, Wireshark, forensics, etc.

アグリゲーション型タップ
Capture multiple links on one interface

1 to 3 Network Regeneration type tap One inline connection (one link) can be monitored with 3 ports
*The output of 1 port can also be monitored with 4 ports
1to3 Regeneration

Model name ETAP-1105
ETAP-2105
product ETAP-1105
ETAP-1105 		ETAP-2105
ETAP-2105
Tap type 1-to-3 Network Regeneration TAP Aggregation type tap
power supply USB bus powered operation (USB cable included)
inline port No. 1-2 (bypass and connect between networks)
monitor port No. 3-5 (traffic from No. 1-2 is added up)
PoE passthrough ○No.1 and No.2 ports
speed 10/100Mbps 10/100/1000Mbps
buffer 256KB RAM 832KB RAM
User guide ETAP-1105-2105_Quick_User_Guide (PDF)
price USD249.00 Contact us USD349.00 Contact us

As a successor to ETAP -1105/ETAP-2105, ETAP-3105, which supports fail-safe
full-duplex capture, is available.

ETAP-3105

Model name ETAP-3105
product ETAP-3105
Tap type Fail-safe 10/100/1000BASE-T GbE
Network Regeneration TAP
power supply USB bus powered operation (USB cable included)
Inline
port 		A-B (bypass and connect between networks)
Monitor
Port
Full duplex compatible 		Aggregation port x1
A+B (A+B traffic is summed)
Non-aggregation ports x2
A (outputs only unidirectional traffic on A port)
B (outputs only unidirectional traffic on B port)
* If high throughput is required, it is recommended to use a pair of non-aggregation monitor ports to avoid packet loss due to port overload
PoE passthrough ○A-B (bypass connection between networks)
PoE-enabled, allowing PoE power to be passed transparently between the two inline ports. This allows the PoE-enabled switch to continue supplying power to PoE-powered devices (e.g. PoE IP phones).
speed 10/100/1000Mbps
Failsafe

○Fail-safe support
ETAP-3105 has a fail-safe bypass function that automatically maintains the link connection between inline ports even in the event of power loss. Therefore, it is suitable for deployment in important link paths of networks.

LFPT ○ Supports link fault pass-through (LFPT)
If a link goes down on one side of the ETAP-3105, the other link will go down automatically. This feature is desirable or required in high availability configurations where redundant link paths must be quickly switched.
rack mount

ETAP-3105-K2

It can be mounted on a rack by using the optional mounting kit (model number: RMKIT-1000 and ETAP-3105-K1 (for 1 unit) and ETAP-31-5-K2 (for 2 units).

price Contact us

Please consider it