Dualcomm Aggregation Type Full Duplex PoE Compatible Gigabit Fiber Compatible Network Tap

This page keeps all original information and links. Japanese page

＋ Product list → CommView → TamoGraph → Wi-Spy → Chanalyzer → WLAN Pi → Nomad → MetageekApp → ProfiShark → IOTA → tap products → Dualcomm → penetration training equipment → password recovery → Side channel fault injection → Wireshark
＋ Dualcomm products → Aggregation type tap → Active type 10G compatible SFP/SFP+ tap
→ Zero delay tap for industrial LAN → 1to3 Regeneration TAP → Optical fiber compatible full duplex tap
→ Raspberry Pi Network Appliance ETAP-PI

DualcommInc.networkタップ製品→ Dualcomm official website

Aggregation type tap → アグリゲーションタップ紹介
アグリゲーション型タップ

The most popular one is ETAP-2003 which captures 1 link (2 ports: 1 inline connection)
ETAP-2205 is available for 2 links (4 ports: 2 inline connections)

Dualcomm

Model name ETAP-2003
USB connection type
PoE pass-through compatible
Gigabit tap 		ETAP-2205
USB connection type
2-link capture compatible
Gigabit tap
product

ETAP-2003

ETAP-2205
Tap type Aggregation type tap Aggregation TAP
power supply USB bus powered operation (USB cable included)

Capture
link

1 link (1 inline connection)
2 INLINE ports
10/100/1000Mbps 		2 links (2 inline connections)
4 INLINE ports
10/100/1000Mbps
PoE passthrough 〇Compatible ○No.1 and No.2 ports
Monitor
port 		10/100/1000Mbps compatible x1
Features ETAP-2003 is an aggregation type tap that is the successor to DCGS-2005.
It supports 1000BASE-T at 10/100/1000Mbps, and is much smaller and easier to carry than the previous model.
Supports PoE pass-through and can obtain power from USB.
Compared to SPAN/port mirroring, it has less packet loss and is suitable for long-term packet capture.

ETAP-2205 is a tap that obtains 2 links with one monitor port
One of the 2 links supports PoE pass-through
10/100/1000Mbps 1000BASE-T compatible USB power supply

This is convenient for capturing 2 links (4 ports: 2 inline connections).

price USD.209.95 Contact us USD349.00. Contact us

If you want to capture two or more links (inline connections) with one port, there is an expandable fail-safe tap ETAP-5203.

Model name

ETAP-5203 Dual-Link/Dual-Mode Failsafe
10/100/1000Base-T Network Tap
ETAP-5203
2 links can be monitored at the same time with one port
Modes can be switched by DIP switch.

DualMode-ETAP-5203

mode

DUAL-Tap mode

Can be operated as two separate Gigabit
taps

DUAL-LINK mode

Transmission and reception of two links can be monitored with
2 ports

Monitor
port 		All monitor ports support fail-safe bypass
(LAN line can continue to be used even if the power is turned off.)
cascade connection ETAP5203Cascade
ETAP-5203 supports cascading
By cascading two ETAP-5203s between monitor ports, you can fail-safely capture 4 links and capture them together on 2 ports
Rack
mount

Supports mounting up to 3 units with optional rack mount kit
ETAP-5203

PoE 〇 Compatible PoE pass-through compatible
price USD1 099.00 Inquiry

Please consider