Dualcomm Aggregation Type Full Duplex PoE Compatible Gigabit Fiber Compatible Network Tap

This page keeps all original information and links. Japanese page

＋ Product list → CommView → TamoGraph → Wi-Spy → Chanalyzer → WLAN Pi → MetageekApp → ProfiShark → IOTA → tap products → Dualcomm → penetration training equipment → password recovery → Side channel fault injection → Wireshark
＋ Dualcomm products → Aggregation type tap → Active type 10G compatible SFP/SFP+ tap
→ Zero delay tap for industrial LAN → 1to3 Regeneration TAP → Optical fiber compatible full duplex tap
→ Raspberry Pi Network Appliance ETAP-PI

DualcommInc. 低価格networkタップ製品→ Dualcomm official website

Optical fiber compatible SFP interface compatible Gigabit Aggregation/Full duplex compatible tap

FullDuplexTAP
How full-duplex taps work

New product released Dualcomm ETAP-2406

ETAP-2406
This is an SFP100/1000Mbps compatible tap that can be used by switching between flooding all ports (SW1) like a repeater hub and

separate capture for sending and receiving (SW2) of the SFP inline connection on the optical fiber side.

ETAP-2406

USD899.00 Please contact us

Model name ETAP-2406
product ETAP2406
ETAP-2406
Product name Dual-Speed 100M/1G SFP Network Tap
type SFPx2 inline connection 100M/1G compatible full duplex tap
fiber

100/1000BASE-X SFP interface x2 (inline connection)

power supply USB bus powered operation (USB cable included)
inline port

Bypass connection between 2 SFP ports on the optical fiber side

monitor port

Mode #1 (Dip SW setting)
*Monitor port (RJ-45) and SFP can communicate like a repeater hub
Wired ports (RJ-45) ports 1-4 and SFPx2 (inline connection)
All communications are flooded to all ports.

Mode #2 (Dip SW setting)
*Performs full-duplex capture of optical fiber (SFPx2 inline connection)
Monitor port (RJ-45) for fiber side communication in full duplex (separate transmission and reception)
Capture the sending side with ports 1 and 3
Capture the receiving side with ports 2 and 4

full duplex monitor ○Mode 2 Fiber side inline connection
Wired side Monitor
on transmitting numbers 1 and 3 and receiving numbers 2 and 4 (2 or more NICs are required)
stack connection ×
speed 100/1000Mbps
price USD899.00 Contact us

ETAP-2206 stack connection
ETAP2206

ETAP-2306 connection image
ETAP2306
Mode#1 The wired side inline connection is aggregation type and is monitored by wired and optical.
Mode#2 The optical side inline connection is aggregation type and the wired side ports 3 and 4 are monitored.
Or send and receive individually Send No. 1 Receive No. 2 Monitor in full duplex with

Model name ETAP-2206
ETAP-2306
product ETAP2206
ETAP-2206 		ETAP2306
ETAP-2306
Product name Dual-Link GbE Copper
and Fiber Network Tap 		Dual-Mode GbE Copper
and Fiber Network Tap
Tap type Optical fiber SFPx2 Gigabit PoE compatible full duplex tap
optical fiber 1000BASE-X SFP interface x2 (inline connection)
power supply USB bus powered operation (USB cable included)
inline port

Optical fiber side Bypass connection between 2 SFP ports or
Wired side PoE compatible No. 1-2 Connect by bypassing LAN

monitor port

Optical side Wired side connections
Total and monitor all
Aggregation type
Total transmission and reception No. 3 and 4

Mode #1 (dip SW setting)
Wired side monitor
Wired side 1-2 inline connection
→ Transmission/reception (Aggregation port) total
Monitor with wired 3-4 and SFP port

Mode #2 (Dip SW setting)
Fiber side monitor
Connect two ports on the SFP side inline
→ Add up transmission and reception (Aggregation ports)
Monitor with wired ports 3 and 4
→ Transmit and receive individually in full duplex
Full duplex monitor with transmitter 1 and receiver 2

full duplex monitor × ○Mode 2 Fiber side inline connection
Wired side Monitor with transmitter 1 and receiver 2
(2 NICs are required)
stack connection

○ Possible Port 3 or 4
Please refer to the diagram

×
PoE passthrough ○No.1 and No.2 ports
speed 10/100/1000Mbps
User guide ETAP-2206（VerB）PDF
price USD599.00 Contact us USD599.00 Contact us

Please consider it.