OSCIUM WiPryPro iOS Compatible Spectrum Analyzer Wireless LAN Investigation Tool with SSID Scan Function

This page keeps all original information and links. Japanese page

＋ Chanalyzer ＋ MetageekApp ＋ WLAN Pi(11be) ＋ Nomad＋ PacketsBundle ＋ SpectrumBundle
＋ Wi-Spy Lucid (2.4/5/6GHz) ＋ WiPry 2500ｘ (2.4/5GHz) ＋ WiPry 790x (900MHz) ＋ WiPry 340x (300-348/387-464MHz)
Ikeriri sells, supports, and maintains the Wi-Pry series as an authorized distributor of 米国OsciumInc. . We can provide products at low agency prices and also provide maintenance support. Please give me inquiry(→Online)
WiPryPro

WiPry-Proシリーズ
WiPry is a spectrum analyzer (commonly known as spectrum analyzer) for iOS devices developed by OsciumInc. .
WiPry-Pro is compatible with the Lightning interface and is also equipped with a wireless LAN chip in addition to a spectrum analyzer chip, allowing it to bypass iOS access restrictions and support access point (SSID) scanning and list display using standard iOS.
Although its functions are limited compared to other spectrum analyzers, it is a very compact, low-cost device that allows you to easily verify radio wave strength.
データシート（WiPry-ProCombo）
データシート <-Click here for series comparison

Wi-Pryシリーズ
This is a very compact, low-priced device that allows simple radio field strength verification. The connector used is 30pin, but if you use a 30pin<->9pin (Thunderbolt) conversion connector, it can be compatible with new iOS devices.

＋ WiPry 2500ｘ (2.4GHz/5GHz)
＋ WiPry 790x (ZigBee 900MHz)

Production discontinued Please use the successor WiPry2500x or WiPry Clarity
Model configuration and specifications
→ ユーザマニュアル(PDF） → クイックスタートガイド(PDF）

Model name WiPry Pro - Spectrum WiPryPro - Combo
interface Lightning interface iOS9 compatible○
SSID scan function Compatible○ Compatible○
Spectrum analyzer function Compatible○ Compatible○
Oscilloscope function Not compatible× Compatible○
Price (negotiable)

USD299.00

USD199.00

Spectrum analyzer mode specifications
bandwidth resolution 400ｋHz
frequency 2.4GHz ～ 2.495GHz
amplitude width -100dBm ～ -5dBm
amplitude resolution 0.5dBm
Antenna terminal gain SMB type 2.4-2.5GHz 0dBi
SSID scan specifications
frequency range 2.4GHｚ ～ 2.5GHz
amplitude range -100dBm ～ -5dBm
amplitude resolution 1dBm
antenna gain Built-in 0dBi
Initial SSID scan time 2 minutes
SSID scan speed (after initial scan) 20 seconds
Information that can be confirmed with wireless LAN visualization Connection mode (802.11b/g/n) Security type
RSSI SSID BSSID Channel Frequency
Power meter mode specifications (WiPry-Pro Combo only)
frequency range 100MHｚ ～ 2.7GHz
sampling rate Up to 50MSPS
amplitude range -35dBm ～ 0dBm
amplitude resolution 0.2dBm
time scale 1 second to 2 microseconds
Antenna terminal gain Shared with SMB type spectrum analyzer